Tank Installation - AquaScape AquaBlox Small Water Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

NOTE: Be sure to check all pieces upon arrival for any damages that may have occured during shipping.
SMALL AQUABLOX
®
The Small AquaBlox
is recommended in use with
®
Pondless
Waterfalls using the Pondless
®
and also when constructing a wetland filter using the Large
Snorkel
Vault and Centipede
®
Side
Small AquaBlox
®

Tank Installation

STEP 1
EXCAVATE STORAGE BASIN
It is recommended to lay out the position of the Pondless
determine actual excavation dimensions.
NOTE: An additional 6" of excavation is recommended per side of the basin to allow for AquaBlox
backfill material, and compaction required during backfilling.
See the diagrams below for examples of Pondless
constructed by increasing the quantity of Small AquaBlox
with the Large AquaBlox
NOTE: Check for presence of high water table in the excavation, which must be kept at levels a minimum of 3 feet below
the bottom of the AquaBlox
4
Waterfall Vault
®
Module.
®
Load Bearing Top
26.5"
16"
9.5"
®
. Liner and geotextile dimensions will vary according to the quantity and size of AquaBlox
®
structure at all times.
®
LARGE AQUABLOX
The Large AquaBlox
Pondless
Waterfalls and Rainwater Harvesting System
®
using the Large Snorkel
Centipede
Module.
®
Side
Load Bearing
Bottom
Waterfall Vault and AquaBlox
®
Waterfall storage basin configurations. Larger storage basins can be
and/or using the optional Snorkel Vault Extension in combination
®
®
is recommended in use with
®
Vault and Half- or Large
®
26.5"
16"
17.5"
Large AquaBlox
prior to excavation in order to
®
dimensions, sufficient
®
www.graystonecreations.com
706-865-0220
Side
®
used.
®

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Aquablox large water2949129492

Table des Matières