AquaScape AquaBlox Small Water Mode D'emploi page 7

NOTE: If using the Snorkel Vault and Centipede Modules, small cobbles will need to be backfilled around the excess
excavated perimeter of the filter in order to provide a sufficient base for the AquaBlox
STEP 8
INSTALL AQUABLOX
®
Install AquaBlox in the storage basin, butting them tightly against each other. After placement of the tanks, bring the inner
®
geotextile (if using) up the sides of the tanks. For the Rainwater Harvesting Water Storage Kits please refer to the Rainwater
Harvesting Water Storage Kits diagram that is being installed for the proper tank configuration.
NOTE: When stacking AquaBlox
instructions for more detail.
www.graystonecreations.com
706-865-0220
Snorkel Vault and Centipede
® ®
only one panel "A" is required between the two joined AquaBlox
®
to sit on.
®
. See tank assembly
®
7