Warning!
Laser/LED radiation in the non-visible spectrum possible!
If the degree of hazard of the laser/LED radiation is not known, on no account look into the open fiber ends.
The assigned degree of hazard is for the constructor/operator of the communication equipment to finally determine
and to indicate in a responsible manner (e.g. by affixing standards-compliant warning labels as per DIN EN /IEC
60825-1, applicable issue, by compliance with BGV B2 "Laserstrahlung" (laser radiation), applicable issue).
If the technical data should change in a way that affects the degree of hazard, the warnings must if necessary be
amended accordingly and work safety precautions must taken, see also e.g. DIN EN/IEC 60825-2, applicable issue.
Installation Accessories
1. Cable holder with screw
2. Fiber handling tool
3. Installation instructions
Removing a Main or Branch Cable
1. Open the cover of the buffer tube retainer clips, remove unused retaining clips.
mafm_0505
8
Caution
1
2
mafm_0506
3