Publicité
Les langues disponibles
Les langues disponibles
5. To secure the cable holder, undo a screw from the
base plate or ground lead.
mafm_0508
7. Open and remove the sealing segment as described
in installation instructions S46998-A19-P522.
9. Remove cable with cable strain relief from the base
element.
11. To re-install a cable, use the reverse sequence (as described in installation instructions S46998-A19-P522).
10
6. Secure the cable holder to the base plate of the end
cap with the screw.
Cable holder
mafm_0509
8. Remove the retaining clips with buffer tubes from the
distribution element.
mafm_0510
10. Insert the cable with cable strain relief in the
cable holder.
mafm_0512
mafm_0512
mafm_0511
mafm_0512_1
Publicité
