Dear client,
We congratulate you for the purchase of this electric
brazier. Before switching it on, we do recommend that
you read very carefully the here below instructions as to
control better this device's good use.
SECURITY NORMS
1. Only use this device as indicated in these instructions.
Any other use or unrecommended by the maker can
cause fire, electric shocks or injuries.
2. Make sure that power source corresponds to the one
indicated in the device's characteristics sheet.
3. As to reduce electric shock risk, this plug has been
designed as to correctly fit in a common jack. If the
device's plug does not completely fit in the jack, please
call a qualified technician.
4. Children aged less than 3 have to remain far from the
device unless they are constantly watched over.
5. Children aged between 3 and 8 can only switch the
device on and off as long as the latter be installed in a
correct working position and as long as they be watched
over or have received instructions regarding the safe use
of this device and do understand the risks it represents.
6. Children aged between 3 and 8 cannot plug in,
regulate, fix or clean the device. It has to be used by
children aged more than 8, adults, and people with lack
of awareness or reduced physical, sensitive or mental
capacities ever since they are watched over or previously
received appropriate indications. Children cannot evr
play with the device. The maintenance and cleaning of
this device can in no case be realized by kids without
supervision.
CAUTION-
Some parts of this producto can get really hot
and cause serious burns. It is necessary to have special
caution when children or fragile people are close to the
device. As much as possible, avoid using extension
cables as they can overheat and cause fire risk. Never
use one same extension cable as to plug in several
heaters or braziers. Disconnect the appliance when
moving, but never pulling the cable to unplug it, you
must pull the plug.
7. Do not cover or manipulate the device while working.
8. If power cable is damaged, it has to be replaced by an
authorized technical service as to avoid dangerous
situations.
9. Do not obstruct or manipulate the appliance while it
is in9. functioning.
10. If the power cord is damaged, it should be
replaced by an authorized technical service, in order to
avoid dangerous situations.
11. Always place the appliance on a flat and level stable
surface, when operating, to avoid the possibility of its
overturning. Keep the device away from the
combustible materials such as furniture, pillows,
bedding, papers and curtains.
12. Check that no object rests on the power cord of the
appliance. Do not run the power cord under carpets,
rugs or similar. Keep the power cord away from people
and places at risk of tripping over it.
13. Never touch the wet device and do not use it in the
immediate surroundings of a bath, shower or swimming
pool.
14. This appliance is designed for domestic use indoors,
and is not designed for industrial use.
15. WARNING: To avoid overheating, do not cover the
heating appliance.
This symbol that is included in the sticker
Identifying the device indicates "DO NOT
COVER".
16. The appliance must not be located immediately
below an electrical outlet.
17. Do not insert or allow fingers or foreign objects to
enter the ventilation or air outlet, as this may cause
electric shock, fire or damage to the appliance.
18. Keep this manual for later reference.
19. This device is suitable for well-insulated spaces or for
occasional use.
NOTE:
When using the appliance for the first time, it
may give off odors. Use caution when using it for the
first time in a well-ventilated place.
CARACTÉRISTIQUES TECHNIQUES
REF. 07102
Power: 900W Switch I:
400W Switch II: 500W
Switch I + II: 900W
Voltage: 220 /
240V-50Hz
REF. 07119
Power:
900W (500 + 400)
Voltage: 220 /
240V-50Hz
FONCTIONNEMENT
REF. 07102:
1. Assurez-vous que les interrupteurs soient en position
"0" éteinte puis connecter l'appareil au réseau électri-
que.
2. Sélectionnez la puissance désirée en appuyant sur
l'interrupteur I pour 400W, sur l'interrupteur II pour
500W ou sur les interrupteurs I et II simultanément pour
900W.
3. Pour éteindre l'appareil, veuillez appuyer de nouveau
sur les interrupteurs concernés.
REF. 07119:
1. Connecter l'appareil au réseau électronique.
2. Sélectionnez la puissance désirée en appuyant sur la
position I pour 500W ou sur la position II pour 900W.
3. Pour éteindre l'appareil, il doit se déconnecter du
réseau électrique.