Profile PCL-137 Manuel D'utilisation page 11

USB desk fan
PCL-137
WARNINGS

Never place the fan near flammable liquids and units operating on gas.

Make sure that the fan cannot not come into contact with water or other liquids, this can lead to
the risk of electric shock.

Do not insert objects or fingers in the rotating fins of the unit. Protect your children from this
danger.

Never try to repair the unit yourself. All interventions that are performed by an unauthorised
person could be dangerous; the warranty will be void in this case. Also the replacement of the
USB cable should be performed by a qualified electrician

Use this unit only inside and operate it according to these instructions. Do not use the unit for
other purposes.

Do not use the unit outside and always place it in a dry environment.

Check the USB cable from time to time. Never use the USB cable or unit when they are
damaged.

First unplug the USB cable of the fan from the USB port before moving the fan

First unplug the USB cable of the fan from the USB port before cleaning the fan.

Make sure the fan is on a flat and stable surface during operation so that it cannot fall over.

Never use an extension cord.

Do not use chemical products to clean the fan.

Make sure that children are supervised by an adult when they are near a working fan.
OPERATION

Connect the USB cable of the fan to a USB adapter, USB port of a laptop or computer or a USB
socket.

You can switch the fan on or off with the power button at back of the unit

You can adjust the position of the basket by loosening the
screws and set the basket to the desired position.
MAINTENANCE
Cleaning

Ensure that the unit is disconnected before cleaning the unit.

Clean the enclosure with a soft, damp cloth. Do not use chemical solvents (such as benzene,
alcohol, gasoline).

Do not let water drops fall on the device.
If you will not use the unit for a long period:

Store the unit in a dry place.

Keep the unit dust free.
WARRANTY
The warranty period for PCL-137 is 2 years and commences on the date of purchase. During the
warranty period Eltra NV resolves any defects caused by material or manufacturing faults. Eltra NV
may, optionally, either repair or replace the defective device. Eltra NV is not obligated to repair or
replace units if the defect is a result of damage, misuse, modification or changes made after the date
of purchase. Bring the defective device, along with the original sales receipt, back to the store where
the unit was purchased. Always include a note describing the problem.
EN - 2