orima ORC-1060-C Livre D'instructions page 35

Push button
1. Push stop button, and the motor will stop.
2. Push the Low button, the buzzer will buzz once, and the motor
runs at low speed.
3. Push the high button, the buzzer will buzz once, and the motor
runs at mid speed.
4. Push the High button, the buzzer will buzz once, and the motor
runs at high speed.
5. Push the light button and the two lights will come on. Push it
again and the light will turn off.
Push Slide Switch:
1. "lighting" button
Used to connect or cut off the lighting lamp.
2. " three-range fan speed" sliding button
Used to set the low-range, medium range and high range rotation
speed and ventilation of the fan.
The instruction is only suitable for slim hood.
Rocker Switch:
1. motor switch
is with a high and a low speed, the middle is stop button
2. lamp switch
control the lamp on or off.
pi c6C pi c6C pi c6C
34