Viking YouSafe Twist Manuel De L'utilisateur page 5

VIKING YOUSAFE
FIGURE 2
1
DONNING INSTRUCTION (FIGURE 2)
1. Remove hood and footwear.
2. Don the suit - legs first.
3. Zip the front zipper.
4. Put on the hood.
5. Don the lifejacket.
6. Don the gloves.
7. Jump into the water - feet first. Turn onto
your back. If necessary switch on the locating
light.
MAINTENANCE, INSPECTION AND REPAIR
Maintenance is an important factor for your
safety.
The immersion suit should be checked at least
once a month in accordance with IMO MSC/
Circ. 1047. At the time of this monthly check,
the front zip must be lubricated with the
enclosed lubricant. VIKING recommends that
the immersion suit is inspected at an approved
servicing station once a year. Repairs should be
carried out by an approved servicing station.
Find your nearest servicing station on
VIKING-life.com.
FIGURE 3
VIKING_PS4104_TWIST_1158300_12_2022.indd 5 VIKING_PS4104_TWIST_1158300_12_2022.indd 5
TWIST (PS4104) - IMMERSION SUIT/ CONSTANT WEAR SUIT
™
2 3 4 5
AFTER USE IN WATER
1. Rinse the immersion suit exterior with fresh
water.
2. Dry the suit on a wide hanger and allow to
air.
3. When the suit is dry, repack it in accordance
with instructions or keep it on a wide hanger.
PACKING THE SUIT (FIGURE 3)
1. Place the suit flat on the floor. Unzip.
2. Fold up the feet up to the crotch.
3. Fold the legs up over the feet.
4. Fold the sleeves across the chest.
5. Place the suit into the bag.
SPECIAL CONDITIONS
Store the suit in a cool, dark and dry place.
SPARE PARTS
Please contact a certified VIKING servicing
station. Find your nearest servicing station on
VIKING-life.com.
EN
6
5
24.01.2023 11.51 24.01.2023 11.51