Human Touch massage chairs ht 2720 Mode D'emploi Et D'entretien page 10

take control
Position (up/down arrows) – Use these buttons
along with one of the stationary massage modes,
to set the massage rollers to the desired position
on the backrest. You can press this button
before or after selecting the massage mode.
The remote control is conveniently
located on the left-hand chair arm.
Whether you use it in place, or remove
it from its docking cradle, the buttons
are ergonomically aligned for easy use.
www.humantouch.com
All manuals and user guides at all-guides.com
10
Power – Lights to indicate that
master power switch is on.
Stop – Stops the massage and parks the
massage rollers at the top of the backrest.
Range – Press to customize your vertical
massage range for maximum comfort. Extend
the massage range upward into the Relief Zone
for a unique neck massage, or focus it on your
lower back. It's up to you!
Extended – extends your massage into the
Relief Zone.
Standard (default) – focuses your massage
below the Relief Zone.
Low – concentrates the massage in the lower
portion of your back.
Zone – Press to further tailor your massage by
focusing it on a three-inch zone. After selecting
this feature, use the Position buttons to position
the massage rollers to your target area.
Select an Auto Program to relieve your neck/
shoulders, refresh your full back, or release your
lower back, using a variety of massage modes.
When changing direction using the Position buttons,
there is a slight pause while the chair gears shift.
This is perfectly normal.