Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Read operation instructions/safety instructions!
Before working on or with the tool, read the safety instructions and follow the
instructions during operation.
Do not modify machine or machine tools and accessories after receipt. Permission from the
manufacturer must be obtained before any modifications or alterations are done in compliance with
all safety instructions. Use the machine only for its intended use. Observe the technical data of the
equipment and the ambient temperatures.
Pay attention to labels, restrictions of use and special instruction notes on the machine tools and
the machine itself. Regularly check that the type plate and symbols on the machine are legible. If
necessary, contact the manufacturer to replace them. Only operators with technical knowledge,
trained by authorized responsible technical personnel, may install, adjust, operate, transport and
store the machine.
Generally, the employer is responsible for the faultless condition/operation of the machine and
the adherence to the safety regulations. The machine is designed and manufactured according to
the technical safety regulations.
However, using it, there is still a risk of accidents to the operator or third parties or damage to
the machine or other objects. All current regulations and specifications, which apply to the site of
operation in regards to accident prevention, installation of electrical and mechanical systems as well
as radio interference must be considered.
IMPORTANT - The employer must make sure that...
•
risk assessment is carried out for the specific risks, which can occur due to any operation of
the machine.
•
the function of the safety equipment is regularly checked.
•
the safety symbols and safety notes on the machine/ device and the operating instruction
booklet are observed.
•
the safety instructions and the operating instruction booklet are available completely and in
legible condition on site with the machine.
The employer is obliged to only allow personnel to work on the machine only, who:
•
are familiar with the basic work environment safety rules and accident preventing regulations.
Also, those persons must have been instructed in the correct use of the machine.
•
have read and understood the safety and warning notes in the operating instruction booklet
as well as all other documentation pertaining to the machine.
•
have been tested at regular intervals in regards to their safety-conscious operation of the
machine.
BASIC SAFETY INSTRUCTIONS
EMPLOYER'S OBLIGATIONS
27
Publicité
Table des Matières
