Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
IDENTIFICATION
INSTALLATION
Requirements to the air supply
Pay attention that the operating pressure of 4 bar is not exceeded.
For maximum volume flow, the values given in the table "Technical Specification" have to be met.
The supplied compressed air has to be free of:
. Oil,
. impurities.
Pay attention that all connecting lines:
. Have a cross section being large enough,
. do not have any restrictions or kniks,
. are designed for a minimum operating pressure of 4 bar,
. are replaced regularly at preventative maintenance,
. have an inner and outer abrasion-resistant surface,
. are proved and specified to be non-conductive when being used next to electric conductors,
. meet the local safety requirements.
25
Publicité
Table des Matières
