Setting The Pad Volume; Setting The Stereo Effect; Setting The Midi-Note - Renkforce DD-315 Mode D'emploi

d) Setting the pad volume
The volume of each of the 7 pads can be set independently of the
others.
Briefly push the "VOLUME" (14) button.
Briefly tap the pad for which you want to change the volume.
Use the "SELECT " or "SELECT
lume now (0....31).
e) Setting the stereo effect
You can set the balance for every pad, i.e. how loud the respective
sound effect of a pad is played back on the left or right speaker
respectively (similar to the balance setting in a radio).
Briefly push the "PAN" (14) button.
Briefly tap the pad that you want to set.
Use the "SELECT " or "SELECT
lance now (-8....+8).
f) Setting the midi-note
A midi note can be set for each pad if you have connected the
drum kit to a computer via USB (the corresponding midi software
is required, not enclosed).
Push the "NOTE" (22) button. The decimal point in the display lights
up for "VOICE".
Briefly tap the pad for which you want to change the midi note.
Use the "SELECT " or "SELECT
note for the pad now (n00 - n99).
" (15) button to adjust the vo-
" (15) button to adjust the ba-
" (15) button to set the midi
31