Phoenix Gold Z8150V2 Mode D'emploi page 8

Low Level Input Wiring
Low-level (RCA) input wiring is preferred for best audio performance.
Most boot or hatchback installations will require a 5m RCA cable, while pickup
trucks and under-seat installations will require a 3m RCA cable. Always use a
high quality cable.
NOTE: Do not connect BOTH the high level and low level inputs from your
receiver to your amplifier at the same time!
High Level Input Wiring
The high level input(s) should only be used when your receiver lacks RCA
outputs. If the RCA outputs are not present, connect the speaker outputs from
the receiver to the high level input connector of the amplifier. Be sure to
observe polarity to avoid audio phase problems.
NOTE: Do not connect BOTH the high level and low level inputs from your
receiver to your amplifier at the same time!
© 2018 Phoenix Gold • www.phoenixgold.com
Z Series Slim Active Bass Enclosures
To Audio outputs of head
unit or signal processor