Battery Charging - winncare MANGAR Mode D'emploi

Battery Charging

Fully charge the battery before first use.
• Check the battery charger casing and lead
for signs of damage and if damaged DO NOT
USE.
• Fit the appropriate mains plug adaptor to
the battery charger (A).
• Plug the battery charger into a mains power
socket and connect the charger output lead
to the Airflo Duo charging socket (B).
NOTE: On first charge or when fitting a new
battery it should be fully charged before use. On
subsequent charges the Airflo Duo measures
the battery capacity and charges as required.
As the battery charges, the indicator lights
will incrementally increase to display battery
capacity.
When the battery is fully charged:
• The compressor will move into an energy
saving mode with the top LED flashing
every 6 seconds and the other 3 will be off.
NOTE: The compressor will not run whilst the
charger is connected.
To ensure optimum performance, it is
recommended that the Airflo Duo is left
continuously on charge when not in use. The
batteries cannot be overcharged using this
charger.
AIRFLO DUO
ENGLISH
4
- fig.
1
A
1
Low
capacity
B
Full
capacity