EFBE-SCHOTT SC MALINA E2 Mode D'emploi page 13

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
Never use the appliance near sources of heat. Do not stand
the appliance on hot surfaces (e.g. cooker) or near a flame.
Never use the appliance outside and always place it in a dry
environment.
Never use accessories which are not recommended by the
producer. They could constitute a danger to the user and risk
to damage the appliance. Never use the appliance if it shows
visible damages.
Always unplug the appliance when it is not in use or when
assembling/disassembling it.
Before cleaning, always unplug the appliance from the power
supply. To clean the motor unit, make use of a soft damp
cloth.
Before changing the accessories, i.e. before removing the
clamp clips, the appliance must be switched off and must
have come to standstill.
Never move the appliance by pulling the cord. Make sure the
cord cannot get caught in any way. Do not wind the cord
around the appliance and do not bend it.
Do not have the power cord dangle from working surface and
avoid its contact with hot objects. Do not leave the plastic
parts near hot surfaces as they might melt.
Stand the appliance on a table or flat surface so that it does
not fall.
In the event of any possible vibration occurring or in the event
of a marked drop in the speed of rotation of the motor, the
appliance is to be switched off immediately and the residues
are to be removed by removal of the sieve.
After a running time of 30 min, allow the appliance to cool
down 10 min.
(*)
Competent qualified electrician: after sales department of the
producer or importer or any person who is qualified, approved
and competent to perform this kind of repairs in order to avoid all
danger. In any case you should return the appliance to this
electrician.
13
SC MALINA E2

Publicité

Table des Matières
loading

Produits Connexes pour EFBE-SCHOTT SC MALINA E2

Table des Matières