Technical Characteristics - Urmet 9854/43 Mode D'emploi

REPLACEMENT OF OLD MODELS
Generated tone type
Dual-tone
Modulated by ring
generator
Three-tone
Connections
Replacement of a ringer Ref. 9854/40
Replacement of a ringer Ref. 9854/41
Replacement of a ringer Ref. 9854/42
If the ringer is connected in parallel to 2 or 3 devices (apartment stations or other ringers), check
system power supply ring generator power; for further details, contact Urmet technical customer
service. If the ringer is connected in parallel to more than four devices, or the note generator
power is not suffi cient, connect the ringer to a relay box with a dedicated transformer.
• In parallel to door phones or video door phones with electronic call
• In parallel to door phones with traditional call

TECHNICAL CHARACTERISTICS

Current consumption on terminal pins 12, 0: .......................................................................................180 mA
Operating voltage on terminal pins 12, 0: .................................................................................... 12 Vac ±5%
Ring tone if terminal pins 12, 0 are connected:............................................................. from 800 to 1200 Hz
Loudspeaker impedance: ..........................................................................................................................45 Ω
Guaranteed sound pressure
if terminal pins 12, 0 are connected: ...................................................................................... 85 dB at 1 m
if terminal pins K, Z are connected: ......................................................................................... 78 dB at 1 m
DS9854-003C
Ref. 9854/40
X
terminal pins Ref. 9854/40
+
-
terminal pins Ref. 9854/41
K
Z
terminal pins Ref. 9854/42
CA (1)
6 (2)
terminal pins Ref. 9854/42
CA (1)
6 (2)
Ref. 9854/41
X
terminal pins Ref. 9854/43
terminal pins Ref. 9854/43
terminal pins Ref. 9854/43
terminal pins Ref. 9854/43
Ref. 9854/42
X
12
0
K
Z
Z
K
12
0
Ref. 9854/43
X
X
5