Antari B-100 Mode D'emploi page 5

Once the screws are removed, the lid of the housing can be carefully swung upwards, as
shown above. Take care not to spill any of the bubble fluid inside the unit.
The fluid tank is designed to fit only one way around. Make sure you insert it correctly, as
shown above, with the lower edge facing into the machine.
OPERATION
Turn on the power switch located on the back of the bubble machine. You will notice that
the internal bubble drum and fan is activated. Bubbles may now be produced.
B-100X
B-100X contains a control board allowing the bubble machine to use the wireless and timer
remote controls. The B-100, without this board, cannot use these remote controls. The two
versions are identical in all other respects.
Remotes
Z-10 (on / off)
BCT-1 (Timer for B-100X)
BCR-1 (Wireless for B-100X)
Specification
- Input voltage
- Rated power
- Fluid consumption
- Fluid tank capacity
- Compatible fluid
- Operating time
- Ambient temp. range
- Control
- Optional accessories
- Dimension
- Weight
US model : AC 100-120V, 50 / 60Hz 0.25A
EU model : AC 220-240V, 50 / 60Hz 0.13A
120V 30W
240V 32W
8.3 ml/min
0.7 Liters (0.18 gallon)
Antari BL Bubble Fluid
1.4 hrs at max. output
5 °C - 40 °C (41°F-104 °F)
Manual
Timer (Optional)
Wireless (Optional)
Z-10 Cable Remote (B-100X)
BCT-1 Timer Remote (B-100X)
BCR-1 Wireless Remote (B-100X)
L341 W170 H217 mm
(L13.43 W6.69 H8.54 inch)
4.2 kg (9.26 lbs)
5