MARIMEX Premium Mode D'emploi page 53

EN
Step 1
Slide the leg base onto the
U-shaped leg and tighten
the screws. Assemble all legs
of the trampoline using the
same procedure.
Step 2
Connect all frame tubes with
T-connections to form a ring.
Connecting the last two parts
requires the help of a second
person, who should hold the
opposite side of the frame.
Step 3
Connect the legs of the
trampoline to the round
frame and secure all using
the screws.
Step 4
The jumping mat must be placed with the cross/logo facing upwards. Always hook
the first four springs to the mat opposite one another (cross-shape). This results
the even tension of the jumping matt. Place the remaining springs in place using
the same way.
CAUTION: It is essential to use the provided tensioning tools for tensioning the
springs and to pay increased attention to the protection of your eyes and hands.
53