Publicité
Les langues disponibles
Les langues disponibles
C. Installation of the fixing channel
1) Insert pipe cover into relevant
clips of the side walls of the
fixing channel and push down-
ward.
4) Push pipe cover upward and
remove.
6
2) Insert the fixing channel into the
provided wall recess.
5) Install the "Unibox" with enclo-
sed screws; cut to size, adjust
and assemble the two pre-for-
med and insulated connection
elbows. Both ends should protru-
de horizontally out of the wall
once plastered.
3) Adjust and tighten screws of the
fixing channel.
6) Affix pipe cover onto fixing chan-
nel and Unibox cover onto the
"Unibox".
6)
Attention: Some "Unibox" models
have EPS-valve-insulation which
affects the function. It is not
packaging material.
Publicité
