Daewoo AM301 Guide D'installation Rapide page 53

INSTALLATION ON ACCESSORY SUPPORT
DOOR SENSOR
1. First, wipe down the door or window area and apply
2. double-sided tape to the bottom.
2. The door sensor transmitter (large) and the door
sensor magnet (small) must be installed
separately. The triangular marks on the transmitter
and the magnet should face each other, and the
distance between the two is less than 0.6".
3. When the door or window is opened after installation,
the light will turn on for 2 seconds to indicate that the
installation is complete.
X
0.6"
MAX