Table Des Matières - Aiwa AV-D77 Mode D'emploi

Outdoor Antenna
1 Power lines - When connecting an outdoor antenna, make
sure it is located away from power lines.
2 Outdoor antenna grounding - Be sure the antenna system
is properly grounded to provide protection against unexpected
voltage surges or static electricity build-up. Article 810 of the
National Electrical Code, ANSI/NFPA70, provides information
on proper grounding of the mast, supporting structure, and
the lead-in wire to the antenna discharge unit, as well as the
size of the grounding unit, connection to grounding terminals,
and requirements for grounding terminals themselves.
Antenna Grounding According to the National Electrical Code
GROUND CLAMP
ELECTRIC
SERVICE
EQUIPMENT
NEC-NATIONAL ELECTRICAL CODE
Maintenance
Clean the unit only as recommended in the Operating
Instructions.
Damage Requiring Service
Have the unit serviced by a qualified service technician if:
- The AC power cord or plug has been damaged
- Foreign objects or liquid have gotten inside the unit
- The unit has been exposed to rain or water
- The unit does not seem to operate normally
- The unit exhibits a marked change in performance
- The unit has been dropped, or the cabinet has been damaged
DO NOT ATTEMPT TO SERVICE THE UNIT YOURSELF.
Check your accessories
Remote control
FM antenna
Operating Instructions, etc.
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE
UNIT
(NEC SECTION 810-20)
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250 PART H)
AM antenna
TABLE OF CONTENTS
PRECAUTIONS ................................................................... 1
PREPARATIONS
CONNECTIONS .................................................................. 3
BEFORE OPERATION ........................................................ 7
SOUND
CUSTOM AUDIO ADJUSTMENT ....................................... 8
ELECTRONIC GRAPHIC EQUALIZER .............................. 9
DSP SURROUND .............................................................. 10
BASIC OPERATIONS
SELECTION OF AUDIO/VIDEO SOURCE ....................... 11
RECORDING AN AUDIO SOURCE ................................. 12
RADIO RECEPTION
MANUAL TUNING ............................................................. 13
PRESETTING STATIONS ................................................. 14
DOLBY SURROUND AND DTS SURROUND
SELECTING DOLBY SURROUND ................................... 15
ADJUSTING DOLBY DIGITAL SURROUND SOUND ..... 18
SELECTING DTS SURROUND ........................................ 19
REMOTE CONTROL
OPERATING TV, CABLE TV, VCR AND CD PLAYER ...... 20
TIMER
SETTING THE CLOCK ...................................................... 21
SETTING THE SLEEP TIMER .......................................... 21
GENERAL
SPECIFICATIONS ............................................................. 22
CARE AND MAINTENANCE ............................................ 23
TROUBLESHOOTING GUIDE .......................................... 23
PARTS INDEX ................................................................... 23
APPENDIX
ID CODES FOR TV .......................................................... A-1
ID CODES FOR CABLE TV ............................................ A-3
ID CODES FOR VCR ...................................................... A-4
ID CODES FOR CD PLAYER ......................................... A-5
ID CODES FOR DSS SATELLITE .................................. A-6
n En
2
ENGLISH