Publicité
selecting a track and searching
selecting a track during playback
• briefly press 5 or 6 once or several times to
skip to the current, previous or next track.
y playback continues with the selected track,
and the track's number is displayed.
selecting a track when playback is stopped
1 briefly press 5 or 6 once or several times to
select the desired track. the track number is displayed.
2 press 2; to start cd play.
y playback starts with the selected track.
searching for a passage during playback
1 keep 5 or 6 pressed to find a particular passage in
a backward or forward direction.
y searching starts while playback continues at low
volume. after 2 seconds the search speeds up.
2 release the button when you reach the desired passage.
y playback continues from this position.
notes:
– if the player is in
mode (see mode chapter),
searching is not possible.
– in shuffle, shuffle repeat or repeat mode (see mode chapter),
searching is only possible within the particular track.
selecting different playing possibilities-mode
it is possible to play tracks in random order, to repeat a single track or
the entire cd, and to play the first few seconds of each track.
1 press mode during playback as often as
required in order to activate one of the
following 'modes'. the active mode is shown in
the display.
y shuffle : all tracks of the cd are played in
random order until all of them have been
played once.
y shuffle repeat: all tracks of the cd are
played repeatedly in random order.
yrepeat: the entire cd is played repeatedly.
y
: the first 10 seconds of each of the
remaining tracks are played in sequence.
2 playback starts in the chosen mode after 2
seconds.
• to return to normal playback, press mode repeatedly until the display
shows no active modes.
features
esp / power save mode
with a conventional portable cd-player you might have experienced
that the music stopped e.g. when you were jogging. the electronic
skip protection (esp) prevents loss of sound caused by light vibra-
tions and shocks. continuous playback is ensured. however esp does
not prevent playback interruptions during vigorous running. it also
does not protect the unit against any damage caused by dropping!
on this set powersaving is default on. the power save mode helps to
extend battery lifetime for longer playback.
•
press esp (on the set only) to enter power save
mode.
y
powersave is displayed.
•
press esp again to return to esp mode.
y
powersave disappears.
esp on
power save
esp on
resume and hold
you can interrupt playback and continue (even
after an extended period of time) from the position
where playback stopped (resume) and you can lock
all buttons of the set so that no action will be
executed (hold). use the off–resume–hold slider for
these functions.
resume – continuing from where you have stopped
1 switch the slider to resume during playback to
activate resume.
y resume is shown.
2 press 9 whenever you want to stop playback.
3 press 2; whenever you want to resume playback.
y resume is shown and playback continues
from where you have stopped.
• to deactivate resume, switch the slider to off.
y resume goes off.
hold – locking all buttons
you can lock the buttons of the set by switching the slider to hold. now,
when a key is pressed, no action will be executed. this is of use, for
example, when transporting the player in a bag. with hold activated, you
can avoid accidental activation of other functions.
1 switch the slider to hold (or switch hold on the
remote control) to activate hold.
y all buttons are locked
you press any button. indicator turns red
and flashes. if the set is switched off,
will be shown only when 2; is pressed.
2 to deactivate hold, switch the slider to off. (or
switch hold on the remote control)
note: if you deactivate hold by switching the slider to resume, you will
be activating the resume function.
features
is shown when
Publicité
