Silver Cross Balance Group 1-2-3 Mode D'emploi page 16

MAKE SURE THE CHILD'S FASTENING
HARNESS IS FITTED CORRECTLY AND
NOT TWISTED AT ALL.
IT IS ADVISABLE TO MOVE THE
FRONT SEAT OF THE VEHICLE AS FAR
FORWARD AS POSSIBLE.
DO NOT MAKE UNAUTHORIZED
MODIFICATIONS OR ALTERATIONS TO
THE CHILD CAR SEAT.
ENG
FRA DO NOT LEAVE UNSECURED
LUGGAGE OR OBJECTS ON THE
SPA
PARCEL SHELF IN THE VEHICLE,
ITA
BECAUSE IN THE EVENT OF
DEU
AN ACCIDENT THEY COULD
SWE
CAUSE SERIOUS INJURY TO THE
OCCUPANTS.
FIN
RUS
DURING EVERDAY USE OF THE
VEHICLE, ENSURE THAT NO PARTS OF
ZH-S
THE SEAT BELT OR CHILD SEAT CAN
ZH-T
BECOME TWISTED OR TRAPPED BY A
ARA
MOVABLE SEAT OR IN A DOOR OF THE
VEHICLE.
16
MAINTENANCE
FITTING / REMOVING THE COVER
The cover has 7 fastening points on the
front part.
Simply unfasten these points and then
gently pull the front part of the cover.
On the sides of the seat there are some
plastic parts that are used to fasten the
cover. Simply pull these gently to take the
cover off.
To put the cover back on again just follow
the same process in reverse. Fit the parts
into the slots for the sides.