Sauder Library 158085 Instructions De Montage page 12

Step 8
Fasten the VALANCE (M55) to the TOP MOLDING (M10). Use two
å
BLACK 9/16" LARGE HEAD SCREWS (1S).
Fasten the LONG END MOLDINGS (H) to the ENDS (A and B) and
å
VALANCE (M55). Use ten BLACK 9/16" LARGE HEAD SCREWS (1S).
NOTE: There are no holes in the LONG END MOLDINGS (H). Turn the
å
screws into the grooves of the LONG END MOLDINGS. Do not overtighten.
These edges must be even.
Page 12
M10
M55
H
B
BLACK 9/16" LARGE HEAD SCREW
H
A
158085
1S
(12 used in this step)
www.sauder.com/services