Honeywell Home Round TH8732WFH5004 Guide D'installation page 2

Setup: On-screen menus
1
Press and hold (Weather
button) for 5 seconds to access
the Main Menu.
3
Using s, highlight Set Up and
press OK.
5
Enter the password by pressing
or t to select the first digit and press
OK. Continue for all four digits.
7
Press s or t to highlight the setting
and press OK. Continue until all
settings have been configured. For a
full list of setup options, see "Setup
options" on page 3.
Note: To exit setup early, press t to
highlight EXIT and press OK.
_ _ _ _
2
Using t, highlight Device Details and
press OK. Using t, find the 4-digit
password (date code) and record it above.
Press OK to exit.
4
Using t, highlight Contractor and
press OK.
6
Highlight Set Up and press OK.
8
When all settings are configured, save
changes.
To save and confirm, highlight Yes and
press OK. To exit without saving, press t to
highlight No and press OK.
2