Installing Power Cord; Installing Ir Extender; Installing Als Extender - peerless-AV XTREME 240802754 Mode D'emploi

Installing Power Cord

Insert female end of power cord into power port located inside the input compartment.
Installing IR Extender (Optional)
Insert the 3.5mm end of the included 5V IR
extender into the IR Extender port on the input
panel of the display. IR extender port may not
be compatible with other third party extenders.
C
9
Installing Ambient Light Sensor
Extender (Optional)
Insert the 3.5mm end of the Ambient Light
Sensor Extender (ACCD-ALS sold separately)
into the Ambient Light Sensor Extender port
on the input panel of the display. Connecting
the Ambient Light Sensor Extender will disable
the Ambient Light Sensor that is built into the
display.
2022-07-07
D
#:180-9161-3 (2022-11-10)