Installing Power Cord; Installing Ir Extender; Installing Als Extender - peerless-AV XTREME XHB432 Mode D'emploi

Installing Power Cord

Insert female end of power cord (D) into power port located inside the input compartment.
Installing IR Extender (Optional)
Insert the 3.5mm end of the included 5V
IR extender into the IR Extender port on
the input panel of the display. IR extender
port may not be compatible with other 3
party extenders.
D
rd
C
9
Installing Ambient Light Sensor
(ALS) Extender (Optional)
Insert the 3.5mm end of the ALS Extender
(ACCD-ALS sold separately) into the ALS
Extender port on the input panel of the
display. Connecting the ALS Extender
will disable the ALS that is built into the
display.
2018-05-30 #:180-9116-7 (2020-08-04)