Publicité
Step 12
Fasten a DRAWER FRONT (G) to one of the DRAWER
å
BOX FRONTS (D243). Use four BLACK 7/8" LARGE
HEAD SCREWS (DD).
Fasten two KNOBS (V) to the DRAWER FRONT (G). Use
å
two BLACK 1-1/8" MACHINE SCREW (CC).
NOTE: The hole on back surface of the DRAWER FRONT
å
must be close to the bottom edge.
Repeat this step for the other drawer.
å
BLACK 7/8" LARGE HEAD SCREW
(8 used for the DRAWER FRONTS)
V
The hole on the opposite surface
must be close to the bottom edge.
www.sauder.com/services
DD
D243
G
409044
CC
BLACK 1-1/8" MACHINE SCREW
(4 used for the KNOBS)
Page 17
Publicité
