Publicité
ENGLISH / DEUTSCH
Crimp and tool selection (The electrical connection system for PI heating cable
has to be ordered separately).
Table / Tabelle 1:
Possible combinations for
Kit
XPI / XPI heating cables (Ω/km)
Mögliche Leiter-Kombinationen
XPI / XPI-Kabel (Ω/km)
from
von
65 / 100 (only XPI-F) / 180 / 200 /
380 / 480 / 600 /
700 / 810 / 1000 /
1440 / 1750 /
2000 / 3000 /
4000 / 4400 /
5600 / 7000 /
8000
11.7
11.7 / 15 / 17.8 /
25 / 50 / 80 /
100 (only XPI & XPI-S) /
150 / 320
7 / 10
7 / 10
7 / 10 / 11.7
ENGLISH (*) If the inscriptions on the crimps PI-CRP-01N, PI-CRP-02N and
PI-CRP-03N do not contain 'N', please no longer use.
Contact nVent for more information.
For braid connection in the kit CS-150-2.5-PI:
• X PI & XPI-S : use the braid crimp type BR-CRP-2.5 (2.5 mm²)
and the crimping die CD-PI-02.
• X PI-F : use braid crimp type BR-CRP-1.5 (1.5 mm²) and
crimping die CD-PI-02
|
22
nVent.com/RAYCHEM
PI-TOOL-SET-01 ≤ 2,5 mm²
to
nach
65 / 100 (only XPI-F) / 180 / 200 /
380 / 480 / 600 /
700 / 810 / 1000 /
1440 / 1750 /
2000 / 3000 /
4000 / 4400 /
5600 / 7000 /
8000
65 / 100 / 150 / 200 / 320 /
380 / 480 / 600 /
700 / 810 / 1000 /
1440 / 1750 /
2000 / 3000 /
4000 / 4400 /
5600 / 7000 /
8000
11.7 / 15 / 17.8 /
25 / 50 / 80 /
100 (only XPI & XPI-S) /
150 / 320
65 / 100 (only XPI-F) / 180 / 200 /
380 / 480 / 600 /
700 / 810 / 1000 /
1440 / 1750 /
2000 / 3000 /
4000 / 4400 /
5600 / 7000 /
8000
15 / 17.8 /25 / 50 / 80 /
150 / 320
7 / 10 / 11.7 /
31.5 / 100 (only XPI & XPI-S)
Publicité
