Maintenance And Care - Ultenic D7 Manuel De L'utilisateur

Maintenance and Care

Your Robot is designed to be used regularly. As with most floor care devices, regular use may cause
build-up around brushes, in debris compartments and near filters. We recommend performing
regular maintenance, as outlined in the following pages, to keep your Robot running at optimal
performance.
�. Recommended Care/ Replacement Frequency
PART
Rolling brush
Side brush
Filters
Sensors
Charging contacts
Omnidirectional wheel
�. Maintaining Side Brush
Use a Philips screwdriver to unscrew
the side brush screw and remove the
side brush.
Note:
It is recommended to replace the side brush every �-� months depending on frequency of use.
�. Maintaining Rolling Brush
Pinch the left and right tabs on the
rolling brush cover. Lift and remove the
cover.
CARE FREQUENCY
Once per week
Once per week
Once per week
Once per month
Once per month
Once per month
Remove dirt and debris and reinstall
with Philips screwdriver.
Remove the rolling brush and clean
with included cleaning tool as seen in
the figure below.
REPLACEMENT FREQUENCY
Every 6-12 months
Every 3-6 months
Every 2 months
⸺
⸺
⸺