Cameo FLAT PRO SPOTIX Manuel D'utilisation page 11

COLOUR CHANGE (JUMPING)
In the colour change mode (Jumping Mode), 7 different colours alternate in
rapid succession (red, green, blue, yellow, magenta, cyan, white). The speed
of the program is adjustable separately and a stroboscope effect can also be
activated.
Press the MODE button until "JUMPING" appears in the upper line of the
display. Now, press ENTER until the cursor appears in the lower line of the
display, and then select the rate (SPEED) using the UP and DOWN buttons,
with the colours alternating from 00 to 99.
Confirm with ENTER. The indicator in the bottom line of the display changes
to "FLASH:xx". The cursor will appear in the bottom line at the same
time and you can activate the stroboscope effect using the UP and DOWN
buttons and adjust the strobe frequency from 00 to 99 (FLASH:00 = strobe
deactivated, FLASH:01 = approx. 1 Hz, FLASH:99 = approx. 20 Hz). Confirm
with ENTER.
Colour change
Stroboscope
COLOUR FADING (FADING)
In the colour fading mode (fading mode) different colours are blended
into one another in succession. The speed of the program is adjustable
separately and a stroboscope effect can also be activated.
Press the MODE button until "FADING" appears in the upper line of the
display. Now, press ENTER until the cursor appears in the lower line of the
display, and then select the rate (SPEED) using the UP and DOWN buttons,
with the colours alternating from 00 to 99.
Confirm with ENTER. The indicator in the bottom line of the display changes
to "FLASH:xx". The cursor will appear in the bottom line at the same
time and you can activate the stroboscope effect using the UP and DOWN
buttons and adjust the strobe frequency from 00 to 99 (FLASH:00 = strobe
deactivated, FLASH:01 = approx. 1 Hz, FLASH:99 = approx. 20 Hz). Confirm
with ENTER.
Colour fading
Stroboscope
Speed SPEED: 00-99
Speed FLASH: 00-99
Speed SPEED: 00-99
Speed FLASH: 00-99
OPERATION:
11