How To Use - GOODSSY ELEGANCE G1 Mode D'emploi

HOW TO USE

1. Open the box carefully, take out the machine and accessories, please read the instruction first.
2. Take out the USB cable, connect it to the curler and connect to charge. the LCD display lights up and the symbol of battery is blinking.
3. Once the battery symbol stops blinking, the curler will make a sound meaning that the battery is fully loaded.
4. Press the power key ( 山 )for 2 seconds to turn on the machine, the LCD display lights up, the perming temperature is blinking, press key( △), to increase the temperature by 10C.
Once you've reached the desired temperature, press the power key (山),the symbol of curl direction (R,A,L) is blinking, press key( △ ), choose the curl direction tht suits you. Press the
power key again, the temperature symbols (°C/ ° F) will blink, press key( △ )and choose the one that suits you. Press the power key (山)again, the perming time symbol will, pressing
key( △) will increase the perming time by 2 second after each pression. After choosing the perming time, wait for 2 seconds, the heating symbol (幽)will blink, the machine starts to
heat, the beeping sound means the curler is at temperature, the heating symbol stops blinking, you are ready to use the curler.
5. To use the curler, refer to page 05. Hold your hairs and gently put them in the curler, hold them and press the start key. The curler will hold and lock your hair automatically, the
curl will be done once you hear a sound coming from the machine. Then the machine starts to perm your curly hair according to the time you've previously set. The curler will make
a sound at each second of the perming time. Once you hear a repetitive sound, remove the machine slowly and the curled hair will come out. Repeat until you're done.
06