Twin-Star 23MM4355 Manuel D'instructions page 4

4. Locate Hearth/Base (A) and set out f nished
side up on the f oor.
5. Insert one Wood Dowel (N) into each of the
pre-drilled holes.
6. Attach the Completed assembly from step 3 to
the Hearth/Base (A). Make sure that dowels
are seated into the pre-drilled holes in the
Hearth/Base. Using Bolts (L) and Washers (M)
attach panels through pre-drilled holes in the
mounting blocks.
HAND TIGHTEN ONLY.
7. Insert one Wood Dowel (N) into each of
pre-drilled holes. Push the Right Side Panel (F)
and Left Side Panel (E) snug to completed
assembly from step 6. Using Bolts (L) and
Washers (M) through the pre-drilled holes in
the mounting blocks.
HAND TIGHTEN ONLY.
8. Insert Left Shelf Panel (I) and Right Shelf
Panel (J), from the inside, attach the shelf panel
using Bolts (L) and Washers (M) through the
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
E-3
Left
Side
Panel
L
E
M
N
N
N
N
Right
Shelf
Panel
J
M
L
N
N
Hearth/Base
A
Left
Shelf
Panel
I
Right
Side
Panel
F
L
M
N
N
M
L