T3 LUCEA ID Série Guide De L'utilisateur page 6

OPERATING
10
INSTRUCTIONS
TURN ON
Connect the styling iron to a power source. The
Power Button will light up.
To turn on, press and hold the lit Power Button
until the tool vibrates, and lights start to
cascade up. The styling iron will automatically
start in HeatID mode. The screen will be
unlocked and the HeatID icons will light up
and blink for you to input your hair profile. See
page 13 to set your hair profile.
Note:
• Do not touch the area above the power
button when turning the iron ON or OFF.
• The screen will be unlocked the very first
time you turn on the iron.
SWITCHING BETWEEN HeatID
AND MANUAL MODE
If you prefer to manually select your
temperature, you can switch to Manual Mode.
See page 16 for operation in Manual Mode.
LUCEA ID
OPERATING
INSTRUCTIONS
LUCEA ID
LOCK/UNLOCK SCREEN
Double tap the Power Button to lock and
unlock the screen. You will hear a locking
sound to indicate lock and unlock.
Note: Screen must be locked to
begin heat up.
IDENTIFIYING A LOCKED/
UNLOCKED SCREEN
Locked: Screen is inactive, thus you cannot
change settings if locked.
Unlocked: Screen is active, thus you can
change settings if unlocked.
TURN OFF
To turn off, first unlock the tool by quickly
double tapping the Power Button. Then
press and hold the Power Button until the
iron vibrates and the lights start to cascade
down. The Power Button will remain on until
unplugged.
Note:
• Do not touch the area above the Power
Button when turning the iron ON or
OFF.
• On second time use, the iron will imme-
diately begin heat up to your previous
heat setting. To adjust settings follow
instructions on page 13.
11