Important - Eterna ETA 955.112 Mode D'emploi

2.2 SETTING THE TIME
CROWN
To set the time, pull the crown
C. Turn the crown clockwise or anti-clockwise to position
the hands to the desired time. When the hour hand passes
the 12 o'clock position, you will see whether it is indicating
midnight (the date changes) or midday (the date does not
change). Check that the date set previously has not changed.
Once the setting is complete, push the crown back in against
the case to the rest position A. The hands will restart.
2.3 RAPID DATE CORRECTION
CROWN
Pull the crown
clockwise until the correct date appears in the window
2. Then push the crown
rest position A.
NOTE
During this operation your watch continues to run
normally, hence the time does not need to be
corrected.

IMPORTANT

Never correct the date between 8:00 p.m. and 2:00
a.m. The movement is in the date change process,
and could be damaged.
1 PULLED OUT TO POSITION
1 PULLED OUT TO INTERMEDIATE POSITION
1 out one notch to position B. Turn it
1 back in against the case to the
5 5
1 out two notches to position
C
B