Sauder 420567 Mode D'emploi page 17

Step 13
Insert a SLIDE CAM (10A) into each DRAWER SIDE (D24 and D25).
å
Fasten the DRAWER RIGHT (35AC) to the RIGHT DRAWER SIDE (D24)
å
and the DRAWER LEFT (35AD) to the LEFT DRAWER SIDE (D25). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2.
NOTE: The screw head in the CAM must be visible through the slotted
å
hole in the SLIDE.
NOTE: The glides are not intended to rotate.
å
2
www.sauder.com/service
Glide end
10A
1
D25
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
420567
VIEW THE DRAWER GLIDE VIDEO
Screw head - turn CAM to line up holes
in SLIDES with holes in DRAWER SIDES.
10A
D24
2
3S
If you're doing this to
help a friend, don't
leave without a bite.
Glide end
1
Page 17