Samsung AIRDRESSER DF60 8 G Serie Manuel D'utilisation page 48

Cleaning and maintenance
Lamp (Light source)
This product contains a light source of energy efficiency class <G>.
The lamp(s) and/or control gear(s) are not user-serviceable. To replace the lamp(s) and/
or control gear(s) in the product, contact a local Samsung service centre. For detailed
instructions on replacing lamp(s) or control gear(s) in your product, visit the Samsung
website (http://www.samsung.com), go to Support > Support home, and then enter the
model name.
For detailed instructions on dismantling lamp(s) and/or control gear(s), simply follow the
replacement instruction reached as described above.
Descaling
Perform descaling regularly to increase the performance and lengthen the lifespan of
the product. If you do not perform descaling immediately after getting the notification
message, some functions may be restricted for use and may cause performance decrease
or even shortens the lifespan of the product.
1. When the Descaling Required message appears on the display, remove all items from
the product and then tap and hold Sanitize and Dry for 3 seconds.
2. Empty the Refill Tank and the Drain Tank.
3. Dilute a descaling agent with water as recommended by the manufacturer.
4. Fill the Refill Tank with the diluted descaling agent up to the MAX line.
5. Tap and hold Start/Pause
- If the Drain the tank message appears on the display during descaling, empty the
Drain Tank.
6. When the Refill/Drain the tank message appears on the display, empty both the Refill
Tank and the Drain Tank, and then rinse them thoroughly.
7. Fill the Refill Tank with clean water up to the MAX line, and then insert the Refill Tank
and the Drain Tank.
8. When Supply/Drainage Complete message appears on the display, tap and hold Start/
.
Pause
- If the Drain the tank message appears on the display during descaling, empty the
Drain Tank.
9. When descaling is complete, empty the Drain Tank and fill the Refill Tank with water.
- You can use AIRDRESSER once you finish all these steps.
NOTE
• Vibration and noise may occur during the descaling process; this is normal, and there is
no problem with the product.
48 English
Untitled-2 48
to start descaling.
2022-02-09 5:25:06