Identification; Eu Declaration Of Conformity En - Binzel IROB P400 Mode D'emploi

iROB

1 Identification

The robot welding power source iROB is used in industry and the trade exclusively for automated inert gas
welding.
The following versions are available:
• iROB P400, P400 MV, P500
Its modular design allows an individual mechanical and electronic adjustment via I/O or digital BUS
systems. The robot welding power source iROB may only be operated using original ABICOR BINZEL
spare parts.
These operating instructions only describe the robot welding power source iROB.
1.1 EU Declaration of Conformity
1 Identification
EN - 3