Conceptronic CM3S Manuel De L'utilisateur page 20

ENGLISH
Component connection
S/PDIF connection
Connection example, showing a Component, Composite and S/PDIF connection.
Connecting the Video Cable(s)
You can connect the unit in 3 different ways to your TV:
- Composite
(by using the Composite cable & Scart adapter)
- SCART
- Component **
When using Component, only the video signal is send to your TV or monitor.
**
For the audio signal, use the Audio RCA Jacks on the Composite cable (Red, White).
Composite:
• Connect the Composite cable (Yellow, Red, and White) to the corresponding Composite jacks [10 , 11 ,
12] on the unit.
• Connect the other side of the Composite cable (Yellow, Red, and White) to your TV.
SCART:
• Connect the Composite cable (Yellow, Red, and White) to the corresponding Composite jacks [10 , 11 ,
12] on the unit.
• Connect the other side of the Composite cable (Yellow, Red, and White) to the jacks on the SCART
Adapter.
• Connect the SCART Adapter to the SCART Input of your TV.
Component:
• Connect the Component Cable (Red, Green, and Blue) to the Component jacks [7, 8, 9] of the unit.
• Connect the other end of the Component cable to the Component Jacks on your TV.
6. Connecting your CM3S
20
Composite + SCART connection