Westfalia 92 85 24 Mode D'emploi Originale page 12

Intended Use
 The air sand blaster is a tool driven by compressed air. It is designed for
versatile use. The air sand blaster is suitable for sandblasting of iron, sheet
metal, metal objects, etc.
 The intended use also includes an operation following the operating
instructions.
 Any use beyond these parameters (different media, applying force) or any
changes (reconstruction, no original accessory) can lead to serious risks and is
regarded as use that is contrary to the intended purpose.
Before first Use
Unpack the air sand blaster and the required accessory and check all parts for
any damage in transit. Dispose of packaging materials or store them out of reach
of children. Plastic bags etc. may become a deadly toy for children.
Operation
Screw off the grinding material container (5) and fill it with suitable grinding
1.
material. Then screw the filled container on again.
Put the collecting bag (6) from below over the opening at the front of the
2.
device. Use the hook-and-loop fastener to attach it to the sand blaster.
Depending on the surface to be treated resp.
3.
depending on the operation purpose, attach the
desired nozzle (8 – 11) on the nozzle (1). The nozzle
inserts vary in the shape of their front and in their
blasting characteristics.
The air sand blaster is equipped with a plug nipple
(4). Connect the air hose to the compressor and to
the plug nipple of the air sand blaster. Power up the
compressor.
Firmly put the nozzle insert of the sand blaster to the surface of the workpiece
4.
to be processed to prevent the shot from escaping.
Press the trigger (2) to start the delivery of air and to start-up the sand blaster.
5.
The more you press the trigger, the stronger the sand blast will be. The shot is
thrown against the surface and is then carried into the collecting bag by the
air stream. If necessary, perform some test runs on an unused workpiece
before work.
OPERATION
12