Kohler K-99000 Instructions D'installation page 6

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Surface-Mount - Install the Mounting Bar
3/16"
1"
(25 mm)
Using a 3/16" drill bit, drill three holes on the groove of the mounting bar. One
hole must be positioned on a stud location.
Position the mounting bar on the wall.
Mark the hole locations on the wall.
Drill holes at the marked locations.
Insert anchors (not provided) where needed.
Secure the mounting bar with three 2" hex head screws (provided) or screws
provided with the anchors.
1516730-2-B
6
Kohler Co.

Publicité

Table des Matières
loading

Table des Matières