Cleaning And Maintenance - MPM MRK-17 Mode D'emploi

the container lid and handle (fig. 2). Follow the steps of fixing the lid in the ASSEMBLY OF THE
DICING ATTACHMENT section.
ASSEMBLY OF THE WHISKING ATTACHMENT FOR WHIPPING EGGS, LIGHT CREAM AND SAUCES
On the blender cover (1) mount the whisking attachment (21). Whisking attachment (21) gets
blocked the moment it is pushed into the blender housing. In order to detach the whisking
attachment (21), push the lock release (3) and pull it out.
POWER CONTROL KNOB
Blender has smooth power control by means of knobs (6). This function helps to adjust the en-
gine speed to the particular application. By turning the knob (6) clockwise the power is increased;
by turning it counter-clockwise the power is decreased.
TURBO FUNCTION
TURBO function (5) is used for temporary work at the highest speed. Pulse function – only
after pressing the (5) button . Power of the TURBO function is equal to the highest value avail-
able by means of the control knob (6).
After pressing the TURBO button the appliance starts working at its highest speed/power.
This function can be used only for up to 30 sec. After this time turn off the appliance and wait
until it cools down.
ATTENTION! Before pouring out the content of the container wait until the knife stops rotating.

CLEANING AND MAINTENANCE

ATTENTION! Cutting edges of blades are sharp. Danger of injury! Use them carefully!
1. Unplug the appliance before cleaning.
2. Each time before and after using, disassemble the appliance and wash its parts in warm wa-
ter with detergent, rinse and dry them thoroughly. Water used for cleaning should not be
warmer than 70°C.
3. Components of the appliance (except for the housing) may be used in the washer, if the
temperature is set below 70°C.
4. Periodically check the components before reassembly. If the knives of the mixing attach-
ment (2) get stuck or rotate with difficulty, do not use the blender.
5. Never immerse the appliance in water. Unplug the appliance and then clean the housing
with damp cloth.
6. The motor is greased and do not require additional greasing.
7. If plastic parts become dyed after grinding, e.g. carrot, wipe them with cloth with small
amount of cooking oil.
ATTENTION! Do not clean the appliance using sharp objects, abrasive pastes, solvents and other strong chem-
icals - it can cause damage.
13