Pleasant Hearth OFW110R Instructions De Montage page 7

ASSEMBLY INSTRUCTIONS
5. Attach outer handle (E) to the top of the legs
(G) by inserting four M6 x 15mm bolts (AA)
through pre-drilled holes in handle (E) and legs
(G). Loosely tighten for proper alignment. Once
the pre-drilled holes and bolts are properly
aligned, then finish tightening all bolts with a
screwdriver.
Hardware Used
AA M6 x 15mm Bolt
6. Insert threaded pegs (CC) into edge of fire
bowl (F) as illustrated and hand tighten.
Hardware Used
CC
Threaded Peg
7. For fire pit use, top with mesh cover (B). Place
poker (H) beside fire pit for use as needed.
5
E
AA
x 4
6
x 4
7 7
7
G
CC
B
H
F