Silver Cross Dream Instructions D'installation page 8

8
INSTALLING THE DREAM
I-SIZE BASE
Make sure that your vehicle
has ISOFIX anchor points and is
approved in the vehicle application
list which is supplied with the base.
Locate the vehicle ISOFIX points. If
this is a problem consult the vehicle
manual. They are usually between
the vehicle seat base and back.
1 Insert the two plastic ISOFIX
guides and hook them onto the
vehicle ISOFIX points. The plastic
guides can help identify the vehicle
ISOFIX points and make installation
easier. They can also help with the
protection of your vehicle seat.
2
Pull out the support leg from the
attachment.
3 Lift the paddle lever, centrally
positioned at the front of the base
and push the front support leg
housing towards the base to fully
extend the ISOFIX arms.
4
Connect the ISOFIX arms onto
the vehicle ISOFIX points. Firmly pull
the base towards you making sure
that both arms are connected and
check that the ISOFIX connection
indicator is now showing green
(parts list no.
5
Again lift the paddle lever and
firmly push the base towards and
up against the back of the vehicle
seat. Make sure that the back of
the base is now firmly up against
the rear of the vehicle seat. Check
again that the ISOFIX connection
indicator is showing green (parts
list no.
secure and stable.
ENG
FRA SPA ITA DEU SWE FIN RUS ZH-S ZH-T ARA
-RXB-190409-01r01-DREAM-BASE - all languages 2019.indd 8
All manuals and user guides at all-guides.com
5
)
5)
. The base should now be
6
Push the adjustment button and
adjust the support leg so that it
makes full and firm contact with
the vehicle floor. The two pressure
monitors at the base of the support
leg must turn from red to green
confirming firm contact.
Do not place the front support leg
on a floor storage compartment
lid. The front support leg MUST
make full and firm contact with the
vehicle floor.
Make sure that the support leg does
not raise the base from the surface
of the vehicle seat.
Not all infant carrier bases fit
all vehicles. For advice as to the
suitability of this infant carrier
base please consult the vehicle
application list before you purchase
the base and make sure that the
make, model and year of your
vehicle/s is suitable. If you are in
any doubt please contact Silver
Cross customer services on
0845 8726900.
7
Check that the front support leg
clicks into position and is correctly
adjusted.
8
Lower the Dream Infant Carrier
on to the Dream i-Size Base and
make sure that all 4 connection
bars engage firmly and click into
position on the base connection
points (parts list no.
Make sure the infant carrier handle
is in the upright position and that it
"clicks" into place.
8
).
08/05/2019 12:14