Instruction Manual; To Start A Vehicle - Ceteor PropulStation Mode D'emploi

3. Instruction manual

3.1. To start a vehicle

1.
Connection
Connect the red clamp (+) to the positive terminal (+) of the battery, then connect the
Blue clamp (-) to the negative (-) terminal of the battery.
2.
Start the engine
Turn the ignition key for a maximum of 8-10 seconds, wait for a further 3 minutes
before attempting to start again.
3.
Disconnection
Having started the engine, disconnect the blue (-) clamp 1st, followed by the red (+)
clamp.
4.
Storing
Return the cables and clamps to their support posts on the Booster.
5.
Recharging
Recharge the Booster immediately after use and leave it permanently connected !
1
3
42
Turn OFF ignition before using the Booster.
2
4
5