Cleaning And Maintenance - Team kalorik TKG AP 2000 S Mode D'emploi

All manuals and user guides at all-guides.com

CLEANING AND MAINTENANCE

Be sure to unplug the power supply before cleaning.
• Pre-filter (every 2 weeks): use a vacuum cleaner to remove dust from the filter
surface or wash with water and dry thoroughly.
• Cold catalytic / formaldehyde removal filter (every 2 months): use a vacuum cleaner
to remove dust from the filter surface. Place the filter in a ventilated area. Do not
expose it to the sun. Do not apply force onto the filter and do not clean it with water.
• Antibacterial / HEPA filter : Do not expose it to sunlight or clean it with water.
• Negative ion generator: when the machine makes creaking noises, use the brush to
clean the dust around the generator. Do this regularly.
• Particle sensor (every 2 months): clean regularly with a dry cotton bud to remove
moisture and smoke. Remove the outer sensor cover (fig. 1), use the dry cotton bud
to clean the lens (fig. 2). Use a light if you cannot see clearly.
Note: depending on the place and the way of use (an environment with many smokers
or a very polluted place for example), the life of the filters will be shortened. Make sure
you replace the filters in time.
13
TKG AP 2000 S