Cleaning And Maintenance - Team kalorik TKG AP 1002 Mode D'emploi

CLEANING AND MAINTENANCE

• Disconnect the item from the power cord before cleaning
• Clean the housing only with a damp soft cloth and always wipe it dry
• In case of heavy dirt, you can use a neutral detergent diluted on a cloth
• Do not clean the unit with solvents that may deform or discolor the case
TROUBLE SHOOTING
If the air purifier won't work correctly, please check the possible causes and solution before
contacting the after-sales service.
Problem
The device won't start.
The buttons won't work.
There is an unpleasant smell
coming from the appliance.
The appliance is very noisy
PERFORMANCE INDICATORS
Voltage and power ratings
Air flow volume (m
Noise level
Application area
TKG AP 1002
Check if the power cable
Is there a strong smell in
the room where the
appliance is located?
Has the using period of
the HEPA filter been
Has the filter packaging
been properly removed?
Has the using period of
the HEPA filter been
/h)
3
Possible cause
is plugged in
exceeded?
exceeded?
DC 24V – 16W
≥ 120 m
≤ 50dB (A)
16 m
2
8
Possible solution
Connect the power
cable
Ventilate the room and
re-start the unit.
Replace the HEPA filter
with a new one
Remove the filter
packaging.
Replace the HEPA filter
with a new one
/h
3