Keysight Technologies U1211A Guide Rapide page 10

Performing Current Measurement
Ensure the test leads are disconnected from the input
WARNING
terminals when measuring current with the clamp
meter.
1 Set the rotary switch to ~A.
2 Press Shift to switch between AC current, DC
3 Press the handle to open the clamp jaw.
4 Clamp around a conductor and ensure that
5 Read the display. Press Hz to view the
10 Keysight U1211A, U1212A, and U1213A Quick Start Guide
current (for U1212A and U1213A only), and
AC+DC current (for U1213A only)
measurements.
the conductor fits the markings on the jaw.
frequency indication on the secondary
display.