How To Use; Selecting The Nozzle - Dustbane Victory Manuel De Pièces Et D'opérations

If your nozzles become plugged, soak in hot soapy water and blow out with pressurized air to remove blockage. If your
nozzles become plugged, soak in hot soapy water and blow out with pressurized air to remove blockage.
Example above dirty nozzle #1 and clean nozzle #2. Nozzle #1 have not been properly cleaned after being use. When not
properly cleaned, the sprayer nozzles residual chemical deposits build up. Deposit build up results in decreased bar pressure
and decreased spray patterns.
To reduce the chance of blockage we recommend that after every few days of use spray a tank of water through the unit to
rinse out any residual chemical build up that may have occurred.

How to Use:

1. Rotate collar to
1. Rotate collar to
unlock icon
unlock icon
Removing Tank/
position.
position.
Refi lling Tank
2. Pull locking ring
2. Pull locking ring
1. Rotate collar to unlock
to remove.
to remove.
icon position.
2. Pull locking ring to
remove.
3. Lift unit off the
3. Lift unit off the
3. Lift unit off the tank.
tank.
tank.

Selecting the Nozzle

Rotate the nozzle clockwise to change the
size of the particules.
Setting 2:
80 microns
Optimum Sprayer
Optimum Sprayer
Distance is 24 inches.
Distance is 24 inches.
8 Parts & Operations Manual
Nozzle 1: Dirty
Setting 3:
110 microns
Setting 1:
40 microns
Victory Series
Nozzle 2: Clean
1. Align tank
1. Align tank
grooves into slide
grooves into slide
Connecting Tank
rail, lower machine
rail, lower machine
onto tank.
onto tank.
1. Align tank grooves into
2. Listen for a
slide rail, lower machine
2. Listen for a
"click".
onto tank.
"click".
2. Listen for a "click".
3. Rotate collar to lock
3. Rotate collar to
position.
3. Rotate collar to
lock icon position.
lock icon position.
Align arrow to the
line on the nozzle.
The nozzle located
at the top is the one
activated.
After use, spray a tank of
After use, spray a tank of
water to rinse.
water to rinse.