Barrette BOM-34107838 Instructions D'installation page 3

Determine Gate Opening:
Refer back to "How to Measure"
Gate opening is determined by width of gate plus clearance for
hinge, latch, and drop rod (latch and drop rod sold separately);
refer to latch and drop rod installation instructions for speci c
space requirements.
1.
Place upright rails on side. Slide rails inside
uprights (Fig. 1).
2.
Align the rails to be 90º to the upright (Fig. 2.)
3.
Install outside screws (Fig. 3).
4.
Install adaptor strip. Install boards. Install
opposite adaptor strip. Install remaining upright
(Fig. 4)
5.
Repeat Steps 2 & 3 for opposite gate upright.
Option 1
Upright Upright
Adaptor
Boards
Strips
Determine
location and gate
opening before
installing fence.
90º
Option 2
Upright Upright
Adaptor
Strips
Boards Boards Boards
Fig. 1
Fig. 2
Fig. 3
Fig. 4
3